Interface Kimia pada Paduan Aluminium Tuang yang Dikuatkan dengan Insert Berbahan Cast Iron

Nurhadi Nurhadi
Journal article Jurnal Penelitian Inovasi • September 2010

Unduh teks lengkap
(Bahasa Indonesia, 12 pages)


Bimetallic automotive components consisting of an Al–Si light alloy reinforced with a cast iron insert have been manufactured by gravity die moulding. Special precautions have been taken to ensure a uniform wetting of the insert by the liquid light alloy. Under these conditions, three intermetallic compounds are formed at the insert/alloy interface: η (Al5Fe2), T5 (Al7.4Fe2Si) and T6 (Al4.5FeSi). Upon subsequent heat treatment, T2 (Al5Fe2Si2) and T10 (Al12Fe5Si3) also appear. Growth of these compounds is discussed in terms of thermodynamics, kinetics and reaction mechanism in the Al–Fe and Al–Fe–Si systems. The effect of these chemical changes on the mechanical properties of the insert/alloy joint will be examined Keywords: B. Interface; E. Casting; E. Joining


  • 403 kali dilihat
  • 140 kali diunduh


Jurnal Penelitian Inovasi

Jurnal Penelitian Inovasi is an open access, peer-reviewed journal that publishes original resear... tampilkan semua