Chips are a typical Indonesian snack that is widely favored by the entire community. In the process of making chips it takes the oil drying stage. The purpose of drying oil is to remove the oil content in the chips so that the chips are not rancid. The conventional method commonly used to remove the oil content is by placing the chips on paper. The paper functions to absorb the oil on the chips. In this paper an electric motor-based chips drying machine will be delivered. This machine is built on an induction motor as a driver, an inverter as a speed regulator, and an Arduino Uno microcontroller as a sensor controller. The method of making uses experimental design. This machine will stop automatically when the chips are dry. Three types of chips have been successfully dried with this machine.